• CATATANKU

  • Arsip

  • Meta

  • Masukkan alamat email anda, untuk mengikuti blog ini dan menerima pemberitahuan tentang tulisan baru melalui email.

Desain Kipas Pompa Kapur

Berikut ini adalah command untuk membuat desain kipas pompa kapur sederhana, dengan menggunakan program AutoCAD 2006
 
Regenerating model.
AutoCAD Express Tools Copyright © 2002-2004 Autodesk, Inc.
AutoCAD menu utilities loaded.
Command: z
ZOOM
Specify corner of window, enter a scale factor (nX or nXP), or
[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: c
Specify center point: 0,0
Enter magnification or height <297.0000>:
Command: cylinder (1)
Current wire frame density:  ISOLINES=4
Specify center point for base of cylinder or [Elliptical] <0,0,0>: 12,24.53,0
Specify radius for base of cylinder or [Diameter]: 75
Specify height of cylinder or [Center of other end]: 40
Command: cylinder (2)
Current wire frame density:  ISOLINES=4
Specify center point for base of cylinder or [Elliptical] <0,0,0>: -12,-24.53,0
Specify radius for base of cylinder or [Diameter]: 75
Specify height of cylinder or [Center of other end]: 40
Command: intersect
Select objects: 1 found (silinder 1)
Select objects: 1 found, 2 total (silinder 2)
Select objects:
 
Command: vpoint
Current view direction:  VIEWDIR=0.0000,0.0000,1.0000
Specify a view point or [Rotate] : 1,-2,1
Regenerating model.
 
Command: circle (1)
Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: 62.9552,-26.9782,0
Specify radius of circle or [Diameter]: 20
 
Command: rotate3D
Current positive angle:  ANGDIR=counterclockwise  ANGBASE=0
Select objects: 1 found  (lingkaran 1)
Select objects:
Specify first point on axis or define axis by
[Object/Last/View/Xaxis/Yaxis/Zaxis/2points]: x
Specify a point on the X axis <0,0,0>: _cen of
Specify rotation angle or [Reference]: 90
 
Command: rotate3D
Current positive angle:  ANGDIR=counterclockwise  ANGBASE=0
Select objects: 1 found (lingkaran 1)
Select objects:
Specify first point on axis or define axis by
[Object/Last/View/Xaxis/Yaxis/Zaxis/2points]: z
Specify a point on the Z axis <0,0,0>: _cen of
Specify rotation angle or [Reference]: 23
 
Command: slice
Select objects: 1 found  (gabungan silinder 1 dan 2)
Select objects:
Specify first point on slicing plane by [Object/Zaxis/View/XY/YZ/ZX/3points]
<3points>: o
Select a circle, ellipse, arc, 2D-spline, or 2D-polyline: (lingkaran 1)
Specify a point on desired side of the plane or [keep Both sides]: b
 
Command: move
Select objects: 1 found
Select objects:
Specify base point or [Displacement] <Displacement>: _cen of Specify second
point or <use first point as displacement>: -16.93,46.5148,0
 
Command: slice
Select objects: 1 found
Select objects:
Specify first point on slicing plane by [Object/Zaxis/View/XY/YZ/ZX/3points]
<3points>: o
Select a circle, ellipse, arc, 2D-spline, or 2D-polyline:
Specify a point on desired side of the plane or [keep Both sides]: b
 
Command: e
ERASE
Select objects: 1 found  (potongan atas)
Select objects: 1 found, 2 total (potongan bawah)
Select objects: 1 found, 3 total (lingkaran 1)
Select objects:
 
Command: slice
Select objects: 1 found (gabungan silinder 1 dan silinder 2)
Select objects:
Specify first point on slicing plane by [Object/Zaxis/View/XY/YZ/ZX/3points]
<3points>: yz
Specify a point on the YZ-plane <0,0,0>: 0,-49.5,0
Specify a point on desired side of the plane or [keep Both sides]:
 
Command: slice
Select objects: 1 found (potongan kanan)
Select objects: 1 found, 2 total (potongan kiri)
Select objects:
Specify first point on slicing plane by [Object/Zaxis/View/XY/YZ/ZX/3points]
<3points>: 16.93,-46.5148,0
Specify second point on plane: -16.93,46.5148,0
Specify third point on plane: -16.93,46.5146,40
Specify a point on desired side of the plane or [keep Both sides]: b
Command: e
ERASE
Select objects: 1 found  (potongan kecil atas)
Select objects: 1 found, 2 total (potongan kecil bawah)
Select objects:
 
Command: cylinder (3)
Current wire frame density:  ISOLINES=4
Specify center point for base of cylinder or [Elliptical] <0,0,0>: 0,0,0
Specify radius for base of cylinder or [Diameter]: 43.5
Specify height of cylinder or [Center of other end]: 40
 
Command: union
Select objects: 1 found (potongan kanan)
Select objects: 1 found, 2 total (potongan kiri)
Select objects: 1 found, 3 total (silinder 3)
Select objects:
 
Command:solidedit
Solid editing automatic checking:
SOLIDCHECK=1
Enter a solids editing option
[Face/Edge/Body/Undo/eXit]:b
Enter a body editing option
[Imprint/separate solids/Shell/cLean/Check/Undo/eXit]<eXit>:s
Select a 3D solid:
Remove faces or [Undo/Add/ALL]:
Enter the shell offset distance: -5
Solid validation started.
Solid validation completed.
Enter a body editing option
[Imprint/seParate solids/Shell/cLean/Check/Undo/eXit] <eXit>:
Solids editing automatic checking:  SOLIDCHECK=1
Enter a solids editing option [Face/Edge/Body/Undo/eXit] <eXit>:
 
Command: box
Specify corner of box or [CEnter] <0,0,0>: 14.8779,-40.8766,0
Specify corner or [Cube/Length]: l
Specify length: 50
Specify width: -20
Specify height: 40
 
Command: rotate
Current positive angle in UCS:  ANGDIR=counterclockwise  ANGBASE=0
Select objects: 1 found  (box 1)
Select objects:
Specify base point: 14.8779,-40.8766,0
Specify rotation angle or [Copy/Reference] <0>: 20
 
Command: copy
Select objects: 1 found (box 1)
Select objects:
Specify base point or [Displacement] <Displacement>: 68.7029,-42.5694,0
Specify second point or <use first point as displacement>: -14.8779,40.8766,0
Command: subtract
Select solids and regions to subtract from ..
Select objects: 1 found (gabungan keseluruhan)
Select objects:
Select solids and regions to subtract ..
Select objects: 1 found (box 1)
Select objects: 1 found, 2 total (box 2)
Select objects:
Command: cylinder (4)
Current wire frame density:  ISOLINES=4
Specify center point for base of cylinder or [Elliptical] <0,0,0>: 0,0,40
Specify radius for base of cylinder or [Diameter]: 43.5
Specify height of cylinder or [Center of other end]: 15
 
Command: cylinder  (5)
Current wire frame density:  ISOLINES=4
Specify center point for base of cylinder or [Elliptical] <0,0,0>: 0,0,40
Specify radius for base of cylinder or [Diameter]: 42
Specify height of cylinder or [Center of other end]: 15
 
Command: union
Select objects: 1 found  (silinder 5)
Select objects: 1 found, 2 total (gabungan keseluruhan)
Select objects:
 
Command: subtract
Select solids and regions to subtract from ..
Select objects: 1 found (gabungan silinder 5 dan gabungan keseluruhan)
Select objects:
Select solids and regions to subtract ..
Select objects: 1 found (silinder 4)
Select objects:
 
Command: fillet
Current settings: Mode = TRIM, Radius = 0.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]: r
Specify fillet radius <0.0000>: 5
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius <5.0000>:
Select an edge or [Chain/Radius]: (sisi silinder 4 bawah)
Select an edge or [Chain/Radius]: (sisi silinder 5 bawah)
2 edge(s) selected for fillet.
 
Command: fillet
Current settings: Mode = TRIM, Radius = 5.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]: r
Specify fillet radius <5.0000>: 1
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius <1.0000>:
Select an edge or [Chain/Radius]: (sisi silinder 5 atas)
1 edge(s) selected for fillet.
 
Command: cylinder (6)
Current wire frame density:  ISOLINES=4
Specify center point for base of cylinder or [Elliptical] <0,0,0>: 0,0,-5
Specify radius for base of cylinder or [Diameter]: 15
Specify height of cylinder or [Center of other end]: -8
 
Command: cylinder (silinder 7)
Current wire frame density:  ISOLINES=4
Specify center point for base of cylinder or [Elliptical] <0,0,0>: 0,0,1
Specify radius for base of cylinder or [Diameter]: 12
Specify height of cylinder or [Center of other end]: -14
 
Command: union
Select objects: 1 found (benda gabungan)
Select objects: 1 found, 2 total (silinder 6)
Select objects:
 
Command: subtract
Select solids and regions to subtract from ..
Select objects: Specify opposite corner: 1 found (silinder 6 dan benda gabungan)
Select objects:
Select solids and regions to subtract ..
Select objects: 1 found (silinder 7)
Select objects:
 
Command: fillet
Current settings: Mode = TRIM, Radius = 1.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]: r
Specify fillet radius <1.0000>: 2
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius <2.0000>:
Select an edge or [Chain/Radius]: (silinder 6 atas)
Select an edge or [Chain/Radius]: (silinder 7 atas)
Select an edge or [Chain/Radius]: (silinder 6 bawah)
Select an edge or [Chain/Radius]: (sisi lengkung panjang atas kanan-dalam)
Select an edge or [Chain/Radius]: (sisi lengkung panjang atas kanan-luar)
Select an edge or [Chain/Radius]: (sisi lengkung panjang atas kiri-dalam)
Select an edge or [Chain/Radius]: (sisi lengkung panjang atas kiri-luar)
Select an edge or [Chain/Radius]: (sisi lengkung panjang bawah kanan-dalam)
Select an edge or [Chain/Radius]: (sisi lengkung panjang bawah kanan-luar)
Select an edge or [Chain/Radius]: (sisi lengkung panjang bawah kiri-dalam)
Select an edge or [Chain/Radius]: (sisi lengkung panjang bawah kiri-luar)
11 edge(s) selected for fillet.
 
Command: vpoint
*** Switching to the WCS ***
Current view direction:  VIEWDIR=1.0000,-2.0000,1.0000
Specify a view point or [Rotate] : 1,-1,1
*** Returning to the UCS ***
Regenerating model.
 
Command: fillet
Current settings: Mode = TRIM, Radius = 2.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]: r
Specify fillet radius <2.0000>: 2
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius <2.0000>:
Select an edge or [Chain/Radius]: (lubang box 1-horisontal-sumbu Y-sisi kanan atas)
Select an edge or [Chain/Radius]: (lubang box 1-horisontal-sumbu Y-sisi kanan bawah)
Select an edge or [Chain/Radius]: (lubang hasil copy box 1-horisontal-sumbu Y-sisi kiri atas)
Select an edge or [Chain/Radius]: (lubang hasil copy box 1-horisontal-sumbu Y-sisi kiri bawah)
4 edge(s) selected for fillet.

Tinggalkan Balasan

Isikan data di bawah atau klik salah satu ikon untuk log in:

Logo WordPress.com

You are commenting using your WordPress.com account. Logout / Ubah )

Gambar Twitter

You are commenting using your Twitter account. Logout / Ubah )

Foto Facebook

You are commenting using your Facebook account. Logout / Ubah )

Foto Google+

You are commenting using your Google+ account. Logout / Ubah )

Connecting to %s

%d blogger menyukai ini: